Split Tee

Product Overview

Split Tee Stockist & Supplier in India

A Split Tee is a specialized branch connection fitting used primarily in pipeline systems where a new branch connection must be created on an existing pipeline. It consists of two or more components that fit around the run pipe and are welded together to form a reinforced outlet connection.

As a reliable Split Tee Stockist in India and Split Tee Supplier in India, we supply engineered split tees for pipeline modification, branch connections, hot tapping, and high-pressure service applications.

With an established presence since 1985 and ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certifications, Metal-Link supports split tee requirements with material traceability, inspection documentation and project-based supply.

Get Factory Rates →

Datasheet

Split Tee Specifications

Product Range

Different Types of Split Tees

As an experienced Split Tee Supplier in India, we supply a complete range of split tee fittings for pipeline branch connections, hot tapping operations, and reinforced outlet configurations in industrial and pipeline systems.

Full Encirclement Split Tee

Reinforced Pipeline Branch Connection

A full encirclement Split Tee is designed to fit around the complete circumference of the existing pipe. The two halves are positioned around the pipeline and welded to create a strong branch outlet.

This type is commonly selected when reinforcement and load distribution around the existing pipeline are important.

Typical applications include:

• ✓High-pressure oil and gas pipelines
• ✓Transmission pipeline branch connections
• ✓Pipeline modification and reinforcement projects
• ✓Critical service where full circumferential reinforcement is required

Hot Tap Split Tee

Branch Connection on an Operating Pipeline

A Hot Tap Split Tee is used to establish a branch connection while the pipeline remains in service. The fitting provides a reinforced outlet that can be connected to a valve and hot tapping equipment.

Typical applications include:

• ✓Oil and gas pipelines
• ✓Water transmission lines
• ✓Petrochemical facilities
• ✓Process pipelines
• ✓Pipeline modification projects

The design must consider operating pressure, pipe material, wall thickness, branch size, welding requirements, and applicable hot tapping procedures.

Reinforced Split Tee

Additional Strength for Critical Service

A reinforced Split Tee is designed for applications involving higher mechanical loads, pressure conditions, or branch stresses. The fitting geometry and reinforcement are engineered according to the pipeline and project requirements.

Important design considerations include:

• ✓Main pipe diameter
• ✓Branch diameter
• ✓Pipe wall thickness
• ✓Internal pressure
• ✓Operating temperature
• ✓External loads
• ✓Material compatibility

Butt-Weld Split Tee

Permanent Pipeline Branch Connection

A Butt-Weld Split Tee is permanently welded directly to the pipeline and branch connection. This configuration provides a robust and leak-free branch outlet suitable for long-term service in demanding pipeline environments.

Custom Fabricated Split Tee

Project-Specific Pipeline Branch Fitting

Custom fabricated Split Tees are manufactured according to approved engineering drawings and project-specific requirements. Dimensions including run pipe diameter, branch size, wall thickness, reinforcement geometry, and material grade are designed to meet the specific pipeline system and service conditions.

Material Grades

Common Materials for Split Tees

The Split Tee material is generally selected to match or maintain compatibility with the existing pipeline material and service conditions.

Design Data

Design and Manufacturing Specifications

Split Tees are frequently manufactured according to project-specific drawings because dimensions depend on the existing pipeline and required branch connection. Applicable codes may include pipeline and piping standards such as ASME B31.3, ASME B31.4, ASME B31.8, along with applicable material specifications and project requirements.

Key Design Parameters

Standards & Compliance

Standards and Specifications

Split Tees may be designed and manufactured according to applicable piping, pipeline, material, and project specifications depending on the service application and installation requirements.

Project specifications and engineering calculations are particularly important for split tees because dimensions and reinforcement requirements depend on the specific pipeline system and operating conditions.

Industry Use

Applications of Split Tees

Split Tees are widely used where an existing pipeline requires a new, reinforced, or engineered branch connection while maintaining system integrity and pressure containment.

• ✓Oil and Gas Transmission Pipelines:
  Long-distance oil and gas pipelines requiring reinforced branch connections or hot tap outlets at strategic locations.
• ✓Petroleum Refineries:
  Refinery piping systems where additional branch connections must be installed on existing pipelines without shutdown.
• ✓Petrochemical Plants:
  Process piping systems requiring engineered branch connections in corrosive or high-pressure service.
• ✓Chemical Processing Facilities:
  Chemical service pipelines where material compatibility and reinforced branch design are required.
• ✓Water Transmission Pipelines:
  Large diameter water supply pipelines requiring new branch takeoffs or service connections.
• ✓Offshore Installations:
  Subsea and topside pipeline systems requiring engineered branch connections in demanding environments.
• ✓Pipeline Repair and Modification:
  Existing pipeline systems where damaged sections require reinforcement or new branch connections are added.
• ✓Hot Tapping Operations:
  Live pipeline connections where a new branch must be established without interrupting pipeline operation or depressurization.
• ✓Pump and Compressor Stations:
  Station piping where branch connections for bypass, instrumentation, or additional flow paths are required.

Certification

Testing, Inspection & Quality of Split Tees

As a dependable Split Tee Supplier in India, products can be supplied with inspection and testing according to applicable specifications and project requirements. Available testing may include:

• ✓Chemical composition analysis
• ✓Mechanical testing where applicable
• ✓Positive Material Identification (PMI)
• ✓Dimensional inspection
• ✓Visual examination
• ✓Liquid penetrant testing where required
• ✓Magnetic particle testing where applicable
• ✓Ultrasonic testing where specified
• ✓Radiographic testing where specified
• ✓Hardness testing
• ✓Hydrostatic testing where required

With an established presence since 1985 and ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certifications, Metal-Link supports consistent product quality. Documentation may include Material Test Certificates, PMI reports, dimensional inspection reports, non-destructive testing reports, mechanical test results, and third-party inspection certificates.

View Certificate →

Pan-India Supply

Split Tee Supplier & Stockist Across India

Metal-Link Steel & Alloys supplies Split Tees to EPC contractors, engineering companies, pipeline operators, refineries, petrochemical plants, chemical processing facilities, fabricators, distributors and industrial buyers across major Indian markets. As a Split Tee Supplier in India, Metal-Link supports standard and project-specific requirements based on type, size, material, design pressure, and quantity.

Cities We Supply

Have Questions?

Frequently Asked Questions

What is a Split Tee used for?

A Split Tee is used to create a new branch connection on an existing pipeline. It consists of two or more components that are fitted around the run pipe and welded together to form a reinforced outlet. Split Tees are commonly used for pipeline modification, hot tapping operations, and adding new branch takeoffs without requiring significant pipeline shutdown or replacement.

What types of Split Tees do you supply?

We supply full encirclement split tees, butt-weld split tees, reinforced split tees, hot tap split tees, and custom fabricated split tees in various materials, sizes, and configurations according to project requirements.

What is the difference between a Full Encirclement Split Tee and a standard Split Tee?

A full encirclement split tee is designed to wrap completely around the circumference of the existing pipe, providing reinforcement over the entire pipe cross-section. A standard split tee may only cover a portion of the pipe circumference at the branch location. Full encirclement designs are preferred for high-pressure applications and where complete load distribution around the pipeline is required.

What materials are Split Tees available in?

Split Tees can be supplied in carbon steel, low-temperature carbon steel, alloy steel, stainless steel, duplex steel, and nickel alloys. The material is selected to match or maintain compatibility with the existing pipeline material and the service conditions including pressure, temperature, and process fluid.

What is a Hot Tap Split Tee?

A Hot Tap Split Tee is a specially designed split tee that allows a branch connection to be established on a pipeline that remains in service under pressure. The fitting is welded onto the existing pipeline and connected to a valve and hot tapping machine, which drills through the pipe wall without releasing the pipeline contents or interrupting flow. This is commonly used for oil, gas, water, and process pipelines where shutdown is not feasible.

Can you supply custom Split Tees according to project drawings?

Yes. We supply custom fabricated split tees manufactured according to approved engineering drawings and project-specific requirements. These can be designed for specific run pipe diameters, branch sizes, wall thicknesses, material grades, and design pressures. Material Test Certificates, dimensional inspection, NDT reports, and third-party inspection can be provided as required.